CaptureCardFeaturesCompatibility.CnxPriceRatingCommentsTv Tuner Digital TV DVB-T DVB-S Analog VideoInWin95? Linux?.based on user reports.PCI$2500.0/10 0votes(17354 views)Description (from themanufacturer site)All in one Tri-mode TV tuner: DVB-S digital Satellite, DVB-T digital Terrestrial, Analogue cable Television, Radio and Teletext on your PC! Tri-mode TV receiver for your PC! Watch and record digital satellite, Freeview digital and analogue cable TV on your PC. Listen to FM radio, digital DVB-T or DVB-S radio. Schedule your TV recordings using high quality MPEG-2. Also includes free 7-day EPG for Freeview DVB-T.

• Wintv Hvr 3000 Windows 10 Compatibility

Includes analogue A/V inputs and SoftPVR™, for video recording from VCR or camcorders. With ergonomic remote control.

In Windows 8.1 & Windows 10, right-click the Start menu and select Device Manager. In Windows 8, swipe up from the bottom, or right-click anywhere on the desktop and choose 'All Apps' - swipe or scroll right and choose 'Control Panel' (under Windows System section) - Hardware and Sound - Device Manager.

WinTV-HVR-3000 features Triple mode free-to-air TV receiver: Digital satellite DVB-S Digital terrestrial DVB-T Freeview Analog PAL cable or TV aerial TV Record Digital TV and digital radio in high quality MPEG. Record Analogue cable TV or your personal videos (using the A/V inputs) in MPEG-1 or MPEG-2 formats. Pause Digital or Analogue TV, with instant replay. Listen to DVB-T, DVB-S and FM radio too!

Schedule your TV recordings with WinTV-Scheduler. Also included is the Hauppauge 7-day Electronic Program Guide for DVB-T! Includes Hauppauge IR remote control for easy operation. Triple mode TV receiver for your PC. WinTV-HVR-3000 has three different TV receive modes; analog PAL TV, digital DVB-T and digital DVB-S. Watch analog cable TV, digital Freeview AND digital satellite TV, all on your PC screen!

Digital Television is the TV of the future, providing sharper TV pictures and near CD quality audio. But if you can't currently receive digital TV, the WinTV-HVR-3000 can still be used to watch and record cable TV or from a TV aerial. But you can add DVB-T or DVB-S digital TV reception at any time. Best of all, when receiving both digital and analogue TV, our WinTV2000 application allows you to switch between analogue and digital channels seamlessly.

Plus pause digital TV with instant replay, too! Free-to-air DVB-S digital satellite TV & radio on your PC! Bring hundreds of high-quality digital satellite TV channels to your PC (DiSEqC 1.0. is supported)! Watch and record satellite TV from different countries.

Freeview DVB-T digital terrestrial TV & radio on your PC! Watch more than 50 Freeview digital terrestrial TV broadcasts and digital terrestrial radio on your PC, with a simple rooftop aerial. Analogue TV over cable TV (or terrestrial antenna too!) Connect WinTV-HVR-3000 to your cable TV network and watch TV and FM radio with great stereo audio. Record your TV shows in MPEG-1-VCD, MPEG-2-SVCD or MPEG-2-DVD formats using our SoftPVR. You can also receive analogue teletext on your PC screen! Digital Video Recorder: Record Analogue, DVB-T or DVB-S TV in high quality MPEG! Schedule your digital TV recordings with our WinTV-Scheduler.

For DVB-T users, record TV programs daily or weekly via our free 7 day DVB-T Electronic Program Guide. Watch and record videos from your VCR or camcorder - Attach your external video source to the audio and video inputs to watch analogue video on your PC. Record your personal video to your hard disk in MPEG-1-VCD, MPEG-2-SVCD or MPEG-2-DVD. WinTV-HVR-3000 recordings are compatible with Hauppauge's MediaMVP™. Record TV shows on your PC and watch them on your living room TV set with MediaMVP.

Hauppauge's remote control makes the WinTV-HVR-3000 easy to use - change channels, adjust audio volume, start recordings, all from the Hauppauge ergonomic remote control! System Requirements PC with 1.5 GHz processor or faster (3.0 GHz processor for analogue TV recording with MPEG-2) Microsoft® Windows® XP Service Pack 2 A free PCI slot AGP or PCI-Express graphic card Sound card or on board sound CD-ROM drive (for software installation). Column Explanation Click on this formore technical information. New comments= New comments since your last visit.

Installation notes for WinTV v8.5:A WinTV v8.5 Activation Code will be needed to install this WinTV v8.5 version.If you have a Hauppauge WinTV-HVR-930C (16xxx), Colossus (not Colossus 2), HD PVR model 1212, WinTV-HVR-1100, WinTV-HVR-1300, WinTV-HVR-1400, WinTV-HVR-3000, WinTV-HVR-4000 or WinTV-NOVA-HD-S2,. WinTV v8.5 does not support these products.If you do not have an WinTV Activation Code, but you have a WinTV v7 CD,If you do not have an WinTV Activation Code or your original WinTV v7 CD-ROM, you can. This can then be used to activate WinTV v8.5. For Windows 10, 8, and 7File name: wintv85setup37122.exe File size: 101 MB Date: May 2, 2019 To install the WinTV v8.5 applicationNote: You will need to have your WinTV v8.5 Activation Code to complete this installation. Download the WinTV v8.5 installer. After downloading this file, it's normally saved in the Download directory on your PC. Run wintv85setup from the Download directory on your PC.

Wintv Hvr 3000 Windows 10 Compatibility

Halfway through the installation, a message will pop up asking for you to enter the Activation Code. At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you, is printed on the WinTV v8 activation card or printed on your WinTV v8 CD. You do not need to enter the dashes, and you can use upper or lower case characters. When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon. The WinTV application will run.

On the first run of WinTV, you will asked to select the TV source and then will automatically scan for channels.Note: If you have a WinTV v8 Activation Code for Extend, the latest version of WinTV v8.5 with Extend will also be installed. WinTV-HVR-12xx Windows driverWinTV-HVR driver version 32328For the WinTV-HVR-1200, 1250, 1270, 1400, 1500, 1700, 1800, 1850, 3300, 4400, 5500, 5525 and Starburst boardsName: driver8515432328.exeSize: 9.9 MBUpdated: 12/1/2014 To install the latest Windows driver only:Leave your WinTV-HVR plugged into your PC. Follow the following steps:. Download the Windows driver above. Double click the downloaded driver. This will install the WinTV-HVR Windows driver.

At the completion of the driver install, you should see a message which says Drivers have been updated successfully. At this point, the Windows driver will be installed. Windows Media Center Note to Windows Media Center users:If you want to use WinTV-HVR-12xx to watch and record analog cable TV with Microsoft's Media Center application, do the following:When you run Media Center, go to Tasks / Settings / TV / Set Up TV signalAt ' Set Up your TV signal', click NextAt ' Regional settings', make sure your region is correct and click NextAt ' Download TV options', click Next.At ' TV Signal', click ' I will configure my TV signal manually' and click NextYou will then see: Cable / Satellite / Antenna. Chose the source of your TV signal (Cable for use with analog cable TV) and click Next.Click through the rest of the settings, set up your Guide listings and click Finish. Then return to the main menu.Go to TV + Movies and then live TV to watch and record TV. Setting up your TV tuner in Windows 7 Media CenterHere is a screen by screen view of the setup of Windows Media Center.

It was based on the WinTV-HVR-1600, but the setup with other WinTV-HVR products will be similar.Windows Media Center remote control receiver/blaster configuration utility. Use this utility to enable or disable the built-in IR receiver/blaster hardware on the WinTV-HVR-1850 and WinTV-HVR-2250 for use with Windows Media Center. You would disable the built-in IR receiver/blaster if you are using an external USB attached Windows Media Center remote control.To use this tool:. Download, unzip and install the Hcwcirconfig tool.

After installing the Hcwcirconfig tool, run the program. The tool will be located in Start / All Programs / Hauppauge WinTV / HCWCIRConfig Tool. To configure as a Windows Media Center remote control, put a check in the box labeled Hauppauge Consumer Infrared Receiver click OK – Save Changes. Your computer must be restarted for the changes to take effect.Name: hcwcirconfigtool1.2.28165.zipName: 322KBName: 6/16/2010 Bug fixes for the Windows Media Center 'Low bit rate' error messageMicrosoft has released Windows Media Center patches for the 'Low bit rate' error message.

Use this utility to enable or disable the built-in IR receiver/blaster hardware on the WinTV-HVR-1850 and WinTV-HVR-2250 for use with Windows Media Center. You would disable the built-in IR receiver/blaster if you are using an external USB attached Windows Media Center remote control.To use this tool:. Download, unzip and install the Hcwcirconfig tool. After installing the Hcwcirconfig tool, run the program.

The tool will be located in Start / All Programs / Hauppauge WinTV / HCWCIRConfig Tool. To configure as a Windows Media Center remote control, put a check in the box labeled Hauppauge Consumer Infrared Receiver click OK – Save Changes. Your computer must be restarted for the changes to take effect.Name: hcwcirconfigtool1.2.28165.zipName: 322KBName: 6/16/2010. PAL Analog CableTV or over-the-air analog TV: You can use your cable TV from the wall to connect to the WinTV-HVR-12xx and receive PAL analog cable TV channels. You can also use a roof top antenna to receive 'over-the-air' TV.Freeview HD (DVB-T2) over-the-air digital TV: Supports Freeview HD or DVB-T2 TV channels.Freeview (DVB-T) over-the-air digital TV: Supports Freeview or DVB-T TV channelsNote: For Freeview and Freeview HD DVB-T digital TV, a rooftop/out door antenna is recommended for optimal results and best signal strength.DVB-C cable TV Channels: DVB-C digital cable TV channels are unencrypted digital cable TV channels.

Clear QAM allows users to watch unencrypted digital TV channels from their cable TV provider without a set-top box.Note: Check your local cable TV provider for DVB-C TV channel reception over your cable TV network. The WinTV-HVR-1200 has Freeview HD support for over-the-air HD.

It can also receive HD TV from a DVB-C source.But the WinTV-HVR-1200 will not be able to decode HD broadcasts that come through your cable or satellite box.If you have an HD cable TV or satellite box and want to record HD TV, you can use Hauppauge's.Note: not all cable operators broadcast DVB-C channels which can be received by the WinTV-HVR-12xx. Contact your local cable operator to check if they provide clear digital cable TV channels.

If you are watching a digital TV channel and you see choppy video, no audio or a black screen, then it is possible your PC is not fast enough to decode and play the digital TV channel you are watching. Please verify that your system meets the minimum requirements for using the WinTV-HVR-1200Digital TV, especially ATSC high definition digital TV, is very CPU intensive. Many graphics cards have special built-in hardware to speed up decoding of high definition TV channels.On graphics cards without special video decoding features, you can often improve the playback performance by using the Video Renderer settings located in the settings menu of WinTV 7. To open the setting menu click on the “gear” button located in the lower left of the WinTV 7 screen.The default mode is EVR. The other modes are VMR9, VMR7 and Overlay. Each mode uses a different process to render video. Try each mode and use the one which gives you the best results.

To use hardware acceleration put a check in the box “use hardware acceleration when possible. This will allow your graphics system to use hardware acceleration for video decode.

Note: graphics hardware acceleration does not work on all systems. After making a change in video rendering settings Wintv must be restarted to take effect. You can bring video into the WinTV from an external audio/video source such as a cable TV or satellite set top box. Depending upon which model WinTV you have, you might need to connect the A/V breakout cable included with your TV tuner.In the WinTV v7 application, click the Setup menu (Gear button in the lower left corner of WinTV v7).Then click on the Devices tab.In the Device Setup Wizard, select External Inputs (S-Video/composite) and click Next.You will be presented with the option to add a Composite and an S-Video Input.

Please select your country (if not correct) and click Next.If you wish to connect a source not normally designed for operation in your country, you can configure the Video Format manually from the drop down list. Change the value from “AUTO”.Note: Pal BGHIDK is the commonly used format in Europe.

NTSC is the broadcast format used in North America. Digital Broadcasts (DVB-T)The file size of a digital signal capture depends on the bitrate of the digital signal.

The bitrate is set by the broadcaster and cannot be user configured. Bitrates for digital signals can range anywhere from about 1.2 Mbits/sec up to 19.3 Mbits/sec. Most of the time these bitrates are variable and not constant. Capture sizes for Freeview (DVB-T) & recordings are approximately 1.7 Gigabytes per hour up to 8.3 Gigabytes per hour.Analog Broadcast.The WinTV v7 application has to convert analog signals to digital in order to record. There are four recording profiles. The following list shows recording file sizes for burning to 4.3Gb DVD:Best - Approx 1 Hour+Better - Approx 1 1/2 HoursGood - Approx 2 HoursFair - Approx 3 Hours.